Hello
I am curious as to which powder you are using in place of the 4759 that is now unavailable?.....
I have been using IMR 4198 as I got a 8 lb tin dirt cheap
I want to do alot of shooting with my Savage this summer and try some different powder
Printable View
Hello
I am curious as to which powder you are using in place of the 4759 that is now unavailable?.....
I have been using IMR 4198 as I got a 8 lb tin dirt cheap
I want to do alot of shooting with my Savage this summer and try some different powder
Richard,
N110 or AA5744 are good to use.
I use AA 5744... Great results with this... :)
5744 was always accurate with mine. But it is really pricey if you can find it. Bullseye in London had some last time I looked. I have an almost full pound of 4759 that isn't being used...
Sent from my SM-G925W8 using Tapatalk
I'd take in the 4759...I have way to much powder if your interested in a trade ...I would also buy itQuote:
Originally Posted by rippin_355
What loads are you using....I have a stock ML10 2 ....right now I'm using 47 grains of IMR 4198..1.5-2 @ 100 yards........Quote:
Originally Posted by Big Jack
Not alot of info I trust...but I'd trust you and most of the people on this forum....I have been reloading for 10 + years too...so I know to start small and go from there...it's just without the brass to examine or the feel of the bolt I am nervous when increasing my loads , as I have no definate way to tell if the load is to hot, or getting there
Pm sent
you need more 4198 than you're presently using before it'll shine,
[QUOTE=smokeeter;1023516]you need more 4198 than you're presently using before it'll
Hello Smokeeter
That's my mistake ...I'm running 57 grains of 4198...
You actually bought some from me....and gave me some of the Sabots.....haven't used them yet.
I'm using the Ones that came with the Hornady bullets
[QUOTE=smokeeter;1023516]you need more 4198 than you're presently using before it'll
Hello Smokeeter
That's my mistake ...I'm running 57 grains of 4198...
You actually bought some from me....and gave me some of the Sabots.....haven't used them yet.
I'm using the Ones that came with the Hornady bullets
what weight bullets are you using? These Savages do better with 300 grainers. and the 57 grs you're using is where you should be starting and working up, there's plenty more room and you'll still be well within safe pressures.
Also if you're shooting for accuracy make sure you leave enough time between shots for the barrel to cool down ( heat destroys sabots)
Savage 10ML ii 100 yard group
Accurate arms 5744 44gr
.300gr XTP
http://i808.photobucket.com/albums/z...psyk9b2ieb.jpg
Good shooting!