I know all broadheads can be tuned and I get the 4 fletch longer fletching,but. Is there any fixed heads that you guys are having more luck with on standard 3 blazer fletching? Thank you
Printable View
I know all broadheads can be tuned and I get the 4 fletch longer fletching,but. Is there any fixed heads that you guys are having more luck with on standard 3 blazer fletching? Thank you
4-blade Slick Tricks; they fly like field points. Tuning blades to align with vanes is a myth.
I like the Slick Trick broadheads also
Slick tricks as well here. Fly exactly like my field points.
Me too, slick tricks on my xbow...
125gr slick tricks (1 1/4" Grizz trick) 92gr brass insert, spin tested for wobble, and they're very close to same POI as field points
Convinced. Got em on order. Thank You
Interesting discovery for me-Slick tricks.
I use Wasp SST 125 gr for many years,and OK with them......but would be willing to try something new too.
Slick tricks has several 4 bladed broad heads.
What would you recommend for Excalibur Exocet 200 lbs draw weight crossbow,in 125 grain?
Thanx
Fresh out of the 2019 ATA show...Wasp has teamed up with Havalon for a new broadhead. I use a Havalon knife for skinning and know how sharp they are...otherwise ??
https://www.youtube.com/watch?v=-_cXVmF5NiU
Same bow using Slick Trick Magnum 125 grain. They have a 1.125" cut and fly almost identically to my field points.Quote:
Originally Posted by gbk
if the bow is tuned then the broadhead should be tuned regardless of fletching.
Thank You DelmerQuote:
Originally Posted by delmer
Used slick trick mags 100g to good effect for years, also found the QAD Exodus 100g heads to do very well out to 40 as well.
I used to be hardcore fixed broadhead after having some bad mechanical experiences years ago... But in the past couple years, i've been converted to mechanical after trying 125gr Swhackers. They fly almost identical to fields, deploy every time and pound through bone. I've been so impressed with them, i had to chime in!
Everyone on here should be spin testing their broad head arrows. Build an arrow spinner out of 2x4, 4 glass marbles and a hot glue gun. Any broadhead should be tuneable to fly properly. No broadhead should be shot before it’s checked for runout. I thought this was basic bow hunting 101.
Not really imo. The only way to tune a broadhead is to get it spinning on point. Anything with runout is out of tune. Super important to your broadhead flight that your bow is paper tuned, but the bow and the arrows both need to be tuned.Quote:
Originally Posted by parkcity
A fixed broadhead amplifies any small issues the equipment and/or the shooter may have.
As such, for a good & consistent flight, a couple of things are needed:
The arrows must have proper spine, square ends, spin checked, etc....
Bow must be in spec to start with i.e.: proper a.t.a. length, brace length, draw weight & length, cams synchronized/timed/lean adjusted, nocking point & rest set properly, etc…...
Then, the bow must be tuned: paper tune, bare shaft tune, french/walk back/group/broadhead tune/etc...). There are personal preferences on how to do this.
And, last not least: shooter’s form must be good & consistent.
What type/style of bow is the op shooting? It will help answers some questions for him