Page 1 of 9 12345678 ... LastLast
Results 1 to 10 of 86

Thread: Utility Trailer Question

  1. #1
    Member for Life

    User Info Menu

    Default Utility Trailer Question

    Were planning to build a utility trailer this year and would like it to be dual axle. However I have heard that a dual axle trailer must be inspected each year. Does anyone know if this is true I can't seem to find anything. The trailer will weigh under 900 KG https://www.ontario.ca/page/register-trailer and this link doesn't seem to say anything about the number of axles.
    "This is about unenforceable registration of weapons that violates the rights of people to own firearms."—Premier Ralph Klein (Alberta)Calgary Herald, 1998 October 9 (November 1, 1942 – March 29, 2013) OFAH Member

  2. # ADS
    Advertisement
    ADVERTISEMENT
     

  3. #2
    Member for Life

    User Info Menu

    Default

    It's been awhile, but I believe it all depends on the vehicle weight rating, VWR, not the number of axles.
    Also if the towing vehicle and trailer weight is over 4500kg....
    Last edited by rick_iles; December 26th, 2016 at 06:31 PM.

  4. #3
    Apprentice

    User Info Menu

    Default

    Here's a link. Hope it's helpful.
    https://smithsequip.com/trailer-safe...ns-in-ontario/
    Last edited by Noseyarentcha; December 26th, 2016 at 06:36 PM.
    My attitude towards you depends upon how you have treated me.

  5. #4
    Member for Life

    User Info Menu

    Default

    I can't see the trailer being more than 900 KG. We plan to make it approx 14 ft long by 7.6 wide. Should be perfect to pull upwards of 3 ATV's. Since we will be pulling with my Jimmy total weight needs to be under 4000 anyways. I was pretty sure the number of axles didn't matter but someone had told me differently so I need to confirm this before we start the build.
    "This is about unenforceable registration of weapons that violates the rights of people to own firearms."—Premier Ralph Klein (Alberta)Calgary Herald, 1998 October 9 (November 1, 1942 – March 29, 2013) OFAH Member

  6. #5
    Apprentice

    User Info Menu

    Default

    Quote Originally Posted by Noseyarentcha View Post
    Quote Originally Posted by greatwhite View Post
    I can't see the trailer being more than 900 KG. We plan to make it approx 14 ft long by 7.6 wide. Should be perfect to pull upwards of 3 ATV's. Since we will be pulling with my Jimmy total weight needs to be under 4000 anyways. I was pretty sure the number of axles didn't matter but someone had told me differently so I need to confirm this before we start the build.
    Call the MTO.
    They will ill advise you.
    Get it in writing GW.
    LOL
    My attitude towards you depends upon how you have treated me.

  7. #6
    Member for Life

    User Info Menu

    Default

    Quote Originally Posted by Noseyarentcha View Post
    Call the MTO.
    They will ill advise you.
    Get it in writing GW.
    LOL
    Yes, check with MTO for sure.

  8. #7
    Needs a new keyboard

    User Info Menu

    Default

    If your hauling 3+ atvs, I'd count on at least 600-700lbs each, or around 2800 lbs + trailer weight of 2000lbs(900kg). Then add a few other things to it and you will be doing the annual inspection for both tow vehicle and trailer.

  9. #8
    Member for Life

    User Info Menu

    Default

    You think it could weigh that much?? Maybe I will have to price the cost of Aluminum instead. My truck can only tow a max of 4500 pounds.

    Quote Originally Posted by Fisherman View Post
    If your hauling 3+ atvs, I'd count on at least 600-700lbs each, or around 2800 lbs + trailer weight of 2000lbs(900kg). Then add a few other things to it and you will be doing the annual inspection for both tow vehicle and trailer.
    "This is about unenforceable registration of weapons that violates the rights of people to own firearms."—Premier Ralph Klein (Alberta)Calgary Herald, 1998 October 9 (November 1, 1942 – March 29, 2013) OFAH Member

  10. #9
    Has all the answers

    User Info Menu

    Default

    Having built a couple of utility trailers myself, I've been guilty of "over building" using heavy wall tubing. If you use larger cross section lighter wall tubing and a heavier single axle you can reduce the weight and cost of a steel trailer significantly.

  11. #10
    Has too much time on their hands

    User Info Menu

    Default

    If the actual loaded weight is above the registered weight of your registered vehicle you will also have problems with the MTO. I had to increase the registered weight of my truck to accommodate a loaded trailer. And if the trailer requires an annual inspection (it's correct term is "a device",) then the tow vehicle requires one too. And then you will have to increase the registered weight of your vehicle. That will cost you extra for licensing. Make sure you are legit because if the MTO stops you, or a properly trained cop, it will cost you a lot of money.
    Eat Moose......12000 wolves can't be wrong!:moose:

Page 1 of 9 12345678 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •