-
August 14th, 2020, 09:39 PM
#1
Has too much time on their hands
Electric motor
I've never owned one or used one, so looking for advice? I've got a 13 ft. tinny that I'm thinking of getting a electric motor for? Need to know what pound thrust is adequate for decent maneuverability to troll with. Appreciate any comments.
Although care has been taken in preparing the information contained in the above post, the author does not and cannot guarantee its accuracy. All rights reserved.
-
August 14th, 2020 09:39 PM
# ADS
-
August 14th, 2020, 09:57 PM
#2
I don't know enough to help you with thrust but I do know they become a PITA every time the battery dies or needs charging so I went with a 2.5 mercury 4 stroke..... I think it weights 40lbs, great on fuel and pushes my 12' really well....
"Everything is easy when you know how"
"Meat is not grown in stores"
-
August 16th, 2020, 11:36 AM
#3
With a 13 foot aluminum you could get away with a 50lb 12v system no problem. If you ever upgrade to a bigger boat then a 70-80lb and 24v system would be better. I know alot of people do just fine with the 12v 50lb, I doubt you want 2 batteries in that size boat just for the extra thrust of a 24v system. If you do have room though consider a 24v system.
-
August 16th, 2020, 01:43 PM
#4
Hey bushmoose I've got a 55lb thrust on my 14'7 deep and wide. It's runs on a 12 volt deep cycle it pushes the boat loaded full of duck and goose decoys and 2 guys at 4mph on GPS. I can run it at least 3 days before I need to charge it if I'm using it for a trolling motor while out fishing. I've had it for 15 years with out any issues. I wouldn't hesitate to buy another one if something happened to it as I have more than got my money out of it.
OFAH Member since 88.
Gun control is a partnership between liberals and criminals.
-
August 16th, 2020, 02:52 PM
#5
Has too much time on their hands
Thanks for the replies fella's! It gives me an idea now, to what I should be looking at if that's the route I decide.
Although care has been taken in preparing the information contained in the above post, the author does not and cannot guarantee its accuracy. All rights reserved.
-
December 5th, 2020, 09:08 AM
#6
I have a 14'..with 40 or 50 lb. Deep cycle CT battery for back lake 4-5 hrs no probs....plenty fast too
-
December 5th, 2020, 01:19 PM
#7

Originally Posted by
Crabb's Camp
I have a 14'..with 40 or 50 lb. Deep cycle CT battery for back lake 4-5 hrs no probs....plenty fast too
Great for back.. trolling or casting..front gets blown around if there is wind
-
December 5th, 2020, 05:30 PM
#8
Has too much time on their hands

Originally Posted by
Crabb's Camp
I have a 14'..with 40 or 50 lb. Deep cycle CT battery for back lake 4-5 hrs no probs....plenty fast too
Thanks for the info!
Although care has been taken in preparing the information contained in the above post, the author does not and cannot guarantee its accuracy. All rights reserved.
-
December 5th, 2020, 07:20 PM
#9

Originally Posted by
Bushmoose
I've never owned one or used one, so looking for advice? I've got a 13 ft. tinny that I'm thinking of getting a electric motor for? Need to know what pound thrust is adequate for decent maneuverability to troll with. Appreciate any comments.
I have an old Minn Kota that I have had since the 1970s (I think its a 40 Lb thrust?) - it just keeps running.
We just inherited a 16 ft Starcraft tin pot with a 20 Hp Merc this spring, and with 3 guys in the boat we kept using the electric instead of the Merc for trolling this summer - pushed us just fine at half throttle.
Any good 12 volt should do the job for you on a 13 ft boat.
-
January 4th, 2021, 01:29 PM
#10
I used to have a big heavy 16’ Naden with an old 25 Johnson when I lived up in Dryden long ago. I bought a cheap MinnKota 12v transom mount that was under 40lbs thrust. Usually had two heavy adults in the boat, it did fine for many years as a trolling motor. Had it on Wabigoon, Lac Seul and Eagle regularly. Never an issue and the battery would last a solid 8+ hours.
My Dad still uses the same old MinnKota on his 14’ Mirrocraft to this day. That little motor is close to 25 years old...
Last edited by Danielson; January 4th, 2021 at 01:33 PM.