Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Savage ML10 2 ...what powder replacer 4759

  1. #1
    Just starting out

    User Info Menu

    Default Savage ML10 2 ...what powder replacer 4759

    Hello
    I am curious as to which powder you are using in place of the 4759 that is now unavailable?.....
    I have been using IMR 4198 as I got a 8 lb tin dirt cheap
    I want to do alot of shooting with my Savage this summer and try some different powder

  2. # ADS
    Advertisement
    ADVERTISEMENT
     

  3. #2
    Has too much time on their hands

    User Info Menu

    Default

    Richard,

    N110 or AA5744 are good to use.

  4. #3
    Needs a new keyboard

    User Info Menu

    Default

    I use AA 5744... Great results with this...

  5. #4
    Apprentice

    User Info Menu

    Default

    5744 was always accurate with mine. But it is really pricey if you can find it. Bullseye in London had some last time I looked. I have an almost full pound of 4759 that isn't being used...

    Sent from my SM-G925W8 using Tapatalk

  6. #5
    Just starting out

    User Info Menu

    Default

    Quote Originally Posted by rippin_355 View Post
    5744 was always accurate with mine. But it is really pricey if you can find it. Bullseye in London had some last time I looked. I have an almost full pound of 4759 that isn't being used...

    Sent from my SM-G925W8 using Tapatalk
    I'd take in the 4759...I have way to much powder if your interested in a trade ...I would also buy it

  7. #6
    Just starting out

    User Info Menu

    Default

    Quote Originally Posted by Big Jack View Post
    Richard,

    N110 or AA5744 are good to use.
    What loads are you using....I have a stock ML10 2 ....right now I'm using 47 grains of IMR 4198..1.5-2 @ 100 yards........
    Not alot of info I trust...but I'd trust you and most of the people on this forum....I have been reloading for 10 + years too...so I know to start small and go from there...it's just without the brass to examine or the feel of the bolt I am nervous when increasing my loads , as I have no definate way to tell if the load is to hot, or getting there

  8. #7
    Has too much time on their hands

    User Info Menu

    Default

    Pm sent

  9. #8
    Loyal Member

    User Info Menu

    Default

    you need more 4198 than you're presently using before it'll shine,

  10. #9
    Just starting out

    User Info Menu

    Default

    [QUOTE=smokeeter;1023516]you need more 4198 than you're presently using before it'll

    Hello Smokeeter
    That's my mistake ...I'm running 57 grains of 4198...
    You actually bought some from me....and gave me some of the Sabots.....haven't used them yet.
    I'm using the Ones that came with the Hornady bullets

  11. #10
    Just starting out

    User Info Menu

    Default

    [QUOTE=smokeeter;1023516]you need more 4198 than you're presently using before it'll

    Hello Smokeeter
    That's my mistake ...I'm running 57 grains of 4198...
    You actually bought some from me....and gave me some of the Sabots.....haven't used them yet.
    I'm using the Ones that came with the Hornady bullets

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •