Page 4 of 5 FirstFirst 12345 LastLast
Results 31 to 40 of 41

Thread: Trailer lights question

  1. #31
    Member for Life

    User Info Menu

    Default

    Quote Originally Posted by rick_iles View Post
    My truck is always on auto mode. All lights come on when it gets dark enough for the censor to turn them on. I have had them come on during storms as well.....
    Thanks for clarifying that. I was sure I had full running lights after dark but it was always tough to be positive while sitting in the driver's seat.

  2. # ADS
    Advertisement
    ADVERTISEMENT
     

  3. #32
    Member for Life

    User Info Menu

    Default

    Quote Originally Posted by rick_iles View Post
    My truck is always on auto mode. All lights come on when it gets dark enough for the censor to turn them on. I have had them come on during storms as well.....
    I've put a 13'6" rig under a 12' bridge at 70 Mph, but I still don't think I'll try it again.

    The system is designed to turn the rear facing lights on at night, it has to pretty dark before they come on.
    Take the warning labels off. Darwin will solve the problem.

  4. #33
    Member for Life

    User Info Menu

    Default

    Quote Originally Posted by Snowwalker View Post
    I've put a 13'6" rig under a 12' bridge at 70 Mph, but I still don't think I'll try it again.

    The system is designed to turn the rear facing lights on at night, it has to pretty dark before they come on.
    I once stayed at a Holiday Inn... but what has that got to do with trailer lights ???

  5. #34
    Member for Life

    User Info Menu

    Default

    Quote Originally Posted by rick_iles View Post
    I once stayed at a Holiday Inn... but what has that got to do with trailer lights ???
    Never mind then......pointing out a problem with the system when it comes to safety.
    Take the warning labels off. Darwin will solve the problem.

  6. #35
    Has too much time on their hands

    User Info Menu

    Default

    Quote Originally Posted by Fisherman View Post
    Well you think you may have solved your problem but it's illegal. Lights must be permanently attached, find it under the link. https://www.tc.gc.ca/eng/motorvehicl...image1-856.htm
    I've been pulled over twice for other reasons while towing; never a mention.

    -Nick
    Krete

    Bills n' Thrills.

  7. #36
    Needs a new keyboard

    User Info Menu

    Default

    I look at it this way, it's a mag mount, hit a substantial bump and it may let go, hit the road rip off and then turn into a flying missile that could hit someone or cause them to try and avoid it and end up going into the rhubarb. Is it worth it. Just an observation.

  8. #37
    Member for Life

    User Info Menu

    Default

    Quote Originally Posted by Snowwalker View Post
    In Auto mode the only lights on a car/truck will be the daytime running lights.

    Word of advice. don't turn your light switch to AUTO. Your tail light and marker lights will not come on, even in a heavy rain or snow you are INVISIBLE to EVERYTHING behind you.
    On a GM, "auto mode" turns on all your lights - same as if you turned them on manually. This goes back at least as far as the 2000 Impala, my 2010 impala was the same, likewise my 2018 Silverado.

    As far as trailer lights being a pain - doesn't everyone own and know how to use a multi-meter - well everyone over 30.

    I find boat wiring (lights, live well, fishfinder) to have more problems than trailers.
    Last edited by werner.reiche; July 15th, 2019 at 01:53 PM.

  9. #38
    Just starting out

    User Info Menu

    Default

    Has anyone else switched to LEDs ? I did and haven't had any bulb issues since. They run cool and don't pop when they hit cold water. I still unplug anyway. Remember to use dielectric grease before installing them.

  10. #39
    Needs a new keyboard

    User Info Menu

    Default

    All about dielectric grease. Apply it after connections are made, not before. It's actually an insulator.
    Dielectric grease, or tune-up grease, is a silicone-based grease that repels moisture and protects electrical connections against corrosion. ... The grease does not conduct electricity, so it shouldn't be applied directly to the mating surfaces (pins and sockets) of an electrical connection.

  11. #40
    Getting the hang of it

    User Info Menu

    Default

    Quote Originally Posted by werner.reiche View Post
    On a GM, "auto mode" turns on all your lights - same as if you turned them on manually. This goes back at least as far as the 2000 Impala, my 2010 impala was the same, likewise my 2018 Silverado.

    As far as trailer lights being a pain - doesn't everyone own and know how to use a multi-meter - well everyone over 30.

    I find boat wiring (lights, live well, fishfinder) to have more problems than trailers.
    You sure about that? Auto mode means they come on automatic when the photocell signals its dark enough. On is on whenever.
    Sorry thought this was a current post did not look at the date.
    Last edited by cricket; March 22nd, 2020 at 03:36 PM.
    Life is a Hiway, enjoy the Ride :cool:

Page 4 of 5 FirstFirst 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •