-
March 1st, 2020, 03:13 PM
#1
Has too much time on their hands
Looking at a custom 458 LBT mold
Been chatting with the fellow that owns LBT and he thinks he can make me up a gas checked spire point mold with a .8” ogive in and around 300 grains.
just going back and forth on whether lube rings can be changed or removed in favour of more substantial contact bands as I powder Coat anyway.
If anyone has a source for a real pointy good bc bullet mold in 458, please comment.
-
March 1st, 2020 03:13 PM
# ADS
-
March 22nd, 2020, 07:16 AM
#2
Has too much time on their hands
Mold is ordered. 300-350 grain two cavity mold with GC. One cavity will have lube rings and the other will have a flat side. .8 inch ogive
-
May 12th, 2020, 07:41 PM
#3
Has too much time on their hands
-
May 13th, 2020, 05:19 AM
#4
Jack,
Mold looks good.
I ordered several molds from Accurate Mold in the US. The owner Tom is a really good fellow to deal with and produces an excellent product. Hopefully your mold works well.
Keep us posted.
Good luck.
-
May 18th, 2020, 11:17 AM
#5
Has too much time on their hands
Originally Posted by
Muskyhunter
Jack,
Mold looks good.
I ordered several molds from Accurate Mold in the US. The owner Tom is a really good fellow to deal with and produces an excellent product. Hopefully your mold works well.
Keep us posted.
Good luck.
I’ve heard that about Tom. I will give home a try.
Here are the casted bullets;
4648326B-3018-4DF4-B9FC-BE2309083F6B.jpg
Reply With Quote
