Saw sharpening

[werner.reiche]

I sharpen my own saws - hand file them. And even if they are bad (hit a rock, or old fence wire), the amount of the tooth you file off a tooth isn't visibly noticeable.

Dropped my saw off this week at rental village for some minor work (wish now I had done it myself). The saw was fairly sharp - it had a new chain from Oct/20 on it. It's been filed several times since then, but still had 90% of it's life left.
The guy at the shop (rental village - a stilh dealer) decided it needed sharpening. In one go he took off about 3/16's of the length of each tooth., left burrs on top of the teeth and the teeth blackened from the heat.
Literally destroyed the chain. I gave them crap and got a 50% discount on a new chain and am sending the mangled one to Stihl Canada.

I'm of the opinion if I didn't ask to have it sharpened, it shouldn't be touched.
Rental village says that if they get in a dull saw, the just go ahead and sharpen it.
The way he sharpens chains - you get one, maybe two sharpenings before the tooth is completely gone.

Anyone ever run into this?

If this is the norm - Stihls biggest problem isn't Chinese knockoffs.

[Bushmoose]

I run husky's. They don't need to be brought in? LOL

But yes, you're right about them trying to sharpen the chain. Sounds like it may have been a kid in the back that most likely didn't know what he/she was doing regarding sharpening? And, if it wasn't on the work order, it shouldn't have been touched? Did they at least file the rakers down to match the tooth?

[Fisherman]

I sharpen my own saws - hand file them. And even if they are bad (hit a rock, or old fence wire), the amount of the tooth you file off a tooth isn't visibly noticeable.

Dropped my saw off this week at rental village for some minor work (wish now I had done it myself). The saw was fairly sharp - it had a new chain from Oct/20 on it. It's been filed several times since then, but still had 90% of it's life left.
The guy at the shop (rental village - a stilh dealer) decided it needed sharpening. In one go he took off about 3/16's of the length of each tooth., left burrs on top of the teeth and the teeth blackened from the heat.
Literally destroyed the chain. I gave them crap and got a 50% discount on a new chain and am sending the mangled one to Stihl Canada.

I'm of the opinion if I didn't ask to have it sharpened, it shouldn't be touched.
Rental village says that if they get in a dull saw, the just go ahead and sharpen it.
The way he sharpens chains - you get one, maybe two sharpenings before the tooth is completely gone.

Anyone ever run into this?

If this is the norm - Stihls biggest problem isn't Chinese knockoffs.

I used to do ours at work, we had 4 with the top handle and another 6 200-300 models. I could easily do 10-12 sharpenings per chain, all depends how close you get the stone to the teeth, you only need to take off about 1/64th if the chain hasn't been cutting granite. We had this model and sharpens right to spec. Comes on sale every now and then. https://www.princessauto.com/en/120v...t/PA0008601577

[Species8472]

I run 2 Stihl saws and same as you hand file them. They last a very long time. Never had issues with the dealer but can't remember the last time they were in either.

Saws get used quite a bit as well with 8-12 face cord cut per season. I'd be pissed. They should have given you the new chain free.

[werner.reiche]

I run husky's. They don't need to be brought in? LOL

But yes, you're right about them trying to sharpen the chain. Sounds like it may have been a kid in the back that most likely didn't know what he/she was doing regarding sharpening? And, if it wasn't on the work order, it shouldn't have been touched? Did they at least file the rakers down to match the tooth?

Not on the work order. It was in to have a shock absorber bushing replaced. I should have done it myself - it's literally a 5 minute job - and I've done it before, but I had to go there to get the part anyway.
Next time I'll just order the part from China via amazon and do it myself.

I've been really going out of my way to support local dealers when I can. Now I feel stupid about it.

[greatwhite]

I Sharpen my own chains as well and I generally give two or 3 passes after every 4th tank.
Most things I repair myself on the saw but I did find a retired small engine mechanic who use to own one of the more popular places in East Ottawa. I got him to put a carb kit in cost me 30 bucks.

[JoePa]

If you want to know anything about chainsaws or small engines go to Steve's Small Engine Saloon on you tube - this guy is great and funny - and likes his beer -

[dean.f]

I've been really going out of my way to support local dealers when I can. Now I feel stupid about it.

I've been burned a few times by a few different businesses over my life, it's encouraged me to do all my own work. It's a rare exception now for me to trust anybody, especially with how available parts and information are these days. As far as chainsaws go, we run Stihl at work and they are hand sharpened by the operator every day.

[MikePal]

Most of the season I hand file...a sharp cutter is the only way to start the day

I sometimes use the Dremel type attachment with a tungston file if I have nicks that need to be cleaned up.

Come spring I take a look and any that need 'expert' touch-ups gets taken to the local 'Mom and Pops' Stihl dealer. They've taken care of my saws for over 20 yrs. They'll sell me the parts or fix the saw, never had a problem with their work.

It's nice to have a professional sharpen, he catches problems (like wear) I miss.

Yea they shouldn't have touched the chain if not requested, but probably appreciated by the average 'homeowner, their primary 'unwitting' customer.


Anyone ever hear of this ? : I was told by a logger never let them us an electric sharpener, the heat generated tempers the steel and you can never get it sharp again with a hand file.

[impact]

I ran my saw today and had to touch it up with a file. Very tricky as I ended up with ribbons instead of chips. This is on a new Stihl factory bar and chain.
Once you touch dirt while cutting, game over.