boring out barrel

[BigLakeDecoys]

ok thanks I will also look into that

[Sinker]

Accuracy Plus can do that for ya no problem. They can ream it out, or thread it for screw in chokes.

S.

[ahadley]

Accuracy Plus can do that for ya no problem. They can ream it out, or thread it for screw in chokes.

S.

Any idea of roughly what this costs? I picked up an old gun with some beautiful wood but would really like to use interchangeable chokes. Unfortunately if it's much more than about $100, I'd rather put the funds towards a new gun.

[jaycee]

Any idea of roughly what this costs? I picked up an old gun with some beautiful wood but would really like to use interchangeable chokes. Unfortunately if it's much more than about $100, I'd rather put the funds towards a new gun.

You had better put the money towards a new gun if you expect to get the work done that cheap.

[outback]

Would like to get my first shotgun threaded to accommodate steel or at least see if it could be done. It's a C.I.L 12guage pump I bought around 73-74 maybe. Looking also for a butt stock or may have to have one made. May have to check with Accuracy Plus and see if it's possible.

outback

[Blue]

accuracy plus bored out my old Winchester 1200, was a few years ago and I believe it was around 30 or 40 bucks. Gun still shoots great and if I lived closer I would go back there again. The only problem was that I took it in to be done right before deer season so it took a little while to get it back.

[diverduck]

I have to ask, why not Keith Long? Last I heard, he was in Bewdly, and while its been many years, when I did go to him, the work was always excellent!

[BigLakeDecoys]

Keith sends it to another local guy who takes to long

[hawgripper]

Heck, just cut it off yourself to 26" smooth bore and shoot all sizes of steel. Same as improved cyl.

lol....

[diverduck]

Keith sends it to another local guy who takes to long

That's new, he used to do all his own work!