Page 3 of 6 FirstFirst 123456 LastLast
Results 21 to 30 of 51

Thread: any recommendations for fixed-blade broad heads?

  1. #21
    Leads by example

    User Info Menu

    Default

    Im a fan of the slick tricks out of my compound. shoot pretty close to my field tips and seem pretty durable, just wish i could a bit bigger cutting diameter
    " You always see the animals when you dont have your gun "

  2. # ADS
    Advertisement
    ADVERTISEMENT
     

  3. #22
    Needs a new keyboard

    User Info Menu

    Default

    Quote Originally Posted by hunter10 View Post
    Im a fan of the slick tricks out of my compound. shoot pretty close to my field tips and seem pretty durable, just wish i could a bit bigger cutting diameter
    Which ones are you using because they do have grizz trick or something like that with a much bigger cutting diameter.
    "I may not have gone where I was supposed to go, but I ended up where I was supposed to be"

  4. #23
    Just starting out

    User Info Menu

    Default

    Quote Originally Posted by hunter10 View Post
    Im a fan of the slick tricks out of my compound. shoot pretty close to my field tips and seem pretty durable, just wish i could a bit bigger cutting diameter
    Agree with Hunter10 , slick trick! Also agree that mechanical from my experience are not as reliable, have shot at turkey with 3 blade rage which didn't open. Just my opinion ! Good luck this year with whatever you decided on!

  5. #24
    Apprentice

    User Info Menu

    Default

    I like my slicktricks I've shot both Griztricks and Vipertricks. I do find out of my setup Griztricks fly better then the Vipertricks

    Dan

  6. #25
    Needs a new keyboard

    User Info Menu

    Default

    Montec's here. Tried others and go back to the Montec's.

    outback

  7. #26
    Loyal Member

    User Info Menu

    Default

    Check out Dirt Naps. Lifetime warranty

  8. #27
    Has too much time on their hands

    User Info Menu

    Default

    Quote Originally Posted by outback View Post
    Montec's here. Tried others and go back to the Montec's.

    outback
    Is there a difference b/w the Montecs? I mean to say is their a Montec for compounds and one for crossbows or are they the same thing?

    thanks

  9. #28
    Just starting out

    User Info Menu

    Default

    Quote Originally Posted by skeeter1 View Post
    Which ones are you using because they do have grizz trick or something like that with a much bigger cutting diameter.
    Don't stress cutting diameter so much. I checked out the broadhead you're are talking about and it's a decent design compared to most. blade sharpness and smoothness is way more important. Narrower heads are less likely to be bent or damaged on the way through. Also being narrower in proves the efficiency of the cutting action. The faster it carries through the cleaner the cut and the brain won't send the signal to start clotting as quickly. Plus the platlettes have a harder time attaching to the tissue which means faster bleeding for longer. It also means a better blood trail as you'll be more likely to pass through. Sometimes less is more.

    The ultimate recipe is two blades or opposed blades if you must go 4.
    3 to 1 ratio in length to width is ideal for mechanical advantage in blade angle. Flying straight and shaving sharp. Single bevel deals with bones and creates a twist through the tissue. Double bevel is just fine too though.

    Having 4 blades versus 3 gives you a huge penetration advantage.

  10. #29
    Leads by example

    User Info Menu

    Default

    I shoot Montecs out of my Compound, my Dad's Xbow and I will shot Montecs on my new Xbow as well. I've shot many different fixed blades just to see which shoots best and the Montecs always gave me the best consistency. As for sharpening them, I have never had an issue...just make sure you sharpen them after each use. So if you miss a shot at game make sure you sharpen your broad head regardless of what it hits. When practicing use the practice broad heads...most companies have a practice broad head...well worth the extra coin.

    If you are able, try and get some other broad heads to compare with. Easier and cheaper if you have some friends that shoot xbows as well that you can try their broad head. Good Luck!
    Expect Nothing, Blame No One, Determine Your Priorities, & Do Something. :thumbup:

  11. #30
    Just starting out

    User Info Menu

    Default

    Quote Originally Posted by Zr2Paul View Post
    I shoot Montecs out of my Compound, my Dad's Xbow and I will shot Montecs on my new Xbow as well. I've shot many different fixed blades just to see which shoots best and the Montecs always gave me the best consistency. As for sharpening them, I have never had an issue...just make sure you sharpen them after each use. So if you miss a shot at game make sure you sharpen your broad head regardless of what it hits. When practicing use the practice broad heads...most companies have a practice broad head...well worth the extra coin.

    If you are able, try and get some other broad heads to compare with. Easier and cheaper if you have some friends that shoot xbows as well that you can try their broad head. Good Luck!
    What's your method for sharpening? How much tighter are your groups with Montecs in your crossbow versus any 2 blade or 4 blade head. How many arrows are you shooting at a time under the same conditions? What weight of heads do you normally shoot? Do you paper tune without feathers?

Page 3 of 6 FirstFirst 123456 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •