-
November 26th, 2014, 12:15 PM
#31
I shoot 58 grain. Hornady's. Out of my 243 I sighted it in for almost 2 inches high at 100 yards. It shoots almost 4000 feet per second. That screams like a hooker on pay day. I took a coyote at 320 yards. And works like Flint. Now i need a new stock, I had a oops a nice thumb hole stock will do the trick.
-
November 26th, 2014 12:15 PM
# ADS
-
November 26th, 2014, 12:33 PM
#32
What barrel twist is yours if you don't mind. I have 2 .243s of my own that I'm working on fine tuning a handload for.
-
November 26th, 2014, 01:17 PM
#33
For most coyote hunting around here the shots are relatively close and if you plan on closer shots, zero it for 150 yards. With an 80 gr bullet this will put it around 0.5" high at 100 yards and 1.5" low at 200 yards.
If you plan on making longer shots regularly, zero it for 250 yards. The 80 gr bullet will only rise a maximum of 2.5" before 250 yards and drop about 3 - 3.5" at 300 yards.
In both cases you'll be able to aim dead on out to 300 yards and still get the yote.
-
November 26th, 2014, 04:40 PM
#34
There is room for all God's creatures - right next to the mashed potatoes!
-
November 26th, 2014, 07:25 PM
#35
My twist rate is 9.25 For a cheap gun it shot great. But I need a stock . less then a year old and the stock went of a permanent vacation.
-
November 26th, 2014, 09:54 PM
#36

Originally Posted by
fratri
Ah, it still seems like too much work/hard for me....

A little work with the program, some time on the range..I mean who does not like time at the range.
Now when I am in the field it is point and shoot. No guessing for hold over/under.
Last edited by Snowwalker; November 26th, 2014 at 10:08 PM.
Take the warning labels off. Darwin will solve the problem.
-
November 26th, 2014, 11:07 PM
#37

Originally Posted by
OntHunter73
My twist rate is 9.25 For a cheap gun it shot great. But I need a stock . less then a year old and the stock went of a permanent vacation.
Thanks, I have to find something for 1-10....
-
November 27th, 2014, 07:23 AM
#38

Originally Posted by
OntHunter73
I shoot 58 grain. Hornady's. Out of my 243 I sighted it in for almost 2 inches high at 100 yards. It shoots almost 4000 feet per second. That screams like a hooker on pay day. I took a coyote at 320 yards. And works like Flint. Now i need a new stock, I had a oops a nice thumb hole stock will do the trick.
Which bullet. Or are you handloading those?
-
November 30th, 2014, 01:52 PM
#39

Originally Posted by
OntHunter73
I shoot 58 grain. Hornady's. Out of my 243 I sighted it in for almost 2 inches high at 100 yards. It shoots almost 4000 feet per second. That screams like a hooker on pay day. I took a coyote at 320 yards. And works like Flint. Now i need a new stock, I had a oops a nice thumb hole stock will do the trick.
Care to share the load?
-
November 30th, 2014, 01:55 PM
#40

Originally Posted by
trimmer21
It will depend on what type and weight of the bullets. I use V-Max 60 gr. hollow points for varmint/predators zeroed at 200M and 100gr. PSP for Deer also at 200M. I find it easier to adjust the aim point than mess with scope zeros all the time.
When did Hornady start making a Vmax hollow point?