Skeg Repair

[410001661]

Well it happened.....I found a new rock on the lake! It messed up my prop pretty good and took a 3" chunk of my skeg off. I just picked up a new prop and was looking for a good guy for skeg repairs in the Hamilton/Burlington area.....anyone know of a good guy that does this kind of work?

[patvetzal]

Depending on the age/size/make of your motor it might be a lot better to just replace the lower half of the gearbox. Then you know how strong it will be the next time. A weldor might not heat treat his repair to manufacturers Spec, or might distort things when he tries.

[jaycee]

http://simcoeproprepair.com/page2.html

For Sale By	Owner

J & J Marine Services 905.768.9188 ~ PROPS SHOP Est. 1988 All repairs are preformed in our shop keeping the cost affordable, re-pitched to factory spec’s using repair blocks then welded and balanced, then finished for your boating pleasure. We also replace spun hubs. Skeg Repairs no need to remove the drive ... We do them on the boat in most cases. don't loose valuable boating time and the added cost R & R - call for details Reconditioned Lower Units in stock Mercury. OMC / BRP, Honda, Suzuki, Yamaha Lower Units available bolt them on and have start having fun. SOLAS PROPELLER / RBX HUB KITS SALES Please view our other adds... contact us at 905.768.9188 Our Mailing address J & J Marine Services P.O. 731 Hagersville, Ont. N0A 1H0 "google is very friendly "

[line052]

You can also buy bolt on skeg repair kits. It is like a sleeve that fits over frame work of old skeg. Just google (image)skeg repair kit, lots of example. This will not work if busted cavity for gear oil. It is functional and works, I have seen two on boats in our lake at Park.

[410001661]

http://simcoeproprepair.com/page2.html

For Sale By	Owner

J & J Marine Services 905.768.9188 ~ PROPS SHOP Est. 1988 All repairs are preformed in our shop keeping the cost affordable, re-pitched to factory spec’s using repair blocks then welded and balanced, then finished for your boating pleasure. We also replace spun hubs. Skeg Repairs no need to remove the drive ... We do them on the boat in most cases. don't loose valuable boating time and the added cost R & R - call for details Reconditioned Lower Units in stock Mercury. OMC / BRP, Honda, Suzuki, Yamaha Lower Units available bolt them on and have start having fun. SOLAS PROPELLER / RBX HUB KITS SALES Please view our other adds... contact us at 905.768.9188 Our Mailing address J & J Marine Services P.O. 731 Hagersville, Ont. N0A 1H0 "google is very friendly "

Always a smart out there. Do you know this guys work? Is he reliable? I can google these guys all day long as well but I was asking for a recommendation.

[410001661]

You can also buy bolt on skeg repair kits. It is like a sleeve that fits over frame work of old skeg. Just google (image)skeg repair kit, lots of example. This will not work if busted cavity for gear oil. It is functional and works, I have seen two on boats in our lake at Park.

I ordered one through Amazon and the issue I have is that I do not have enough Skeg left on the back section of the motor to properly secure the second bolt. So back it goes.

[benner]

had my skeg on my 2011 60hp Yamaha repaired by j and j this fall highly recommended hit a rock doing 28 mph he fixed it up very nice

[jaycee]

Always a smart out there. Do you know this guys work? Is he reliable? I can google these guys all day long as well but I was asking for a recommendation.

I wouldn't know, 50 plus years of running boats, have never ruined a skeg!.

[410001661]

............

[410001661]

............

Here we go.......

Read my original post. I was not asking 'who' did this kind of work I was asking for a reference for someone that is good at this kind of work. Any idiot can sit their down at a PC and come up with a list of shops. Then to sign off with 'google is very friendly'.......please! I hardly call that offering advice in good faith.

Thanks for the other posts - greatly appreciated!!!! Apparently they read my post.

Not getting into a pi$$ing match here.......just stating the obvious.