New Hunter

[ben1983]

Limited to manufacture defects/problems. If I smash my gun with a sledge hammer it's not covered under warranty

Sent from my SM-N960W using Tapatalk

lol no kidding eh. what happens if you put a couple rounds through it that it doesn't like for whatever reason and decides not to eat or poop? (shoot or function)

[DataPak420]

lol no kidding eh. what happens if you put a couple rounds through it that it doesn't like for whatever reason and decides not to eat or poop? (shoot or function)

Well I'd imagine the first thing they would say is to try different ammo. But if something doesn't work or malfunctions because the bolt or someother part is not made properly or up to QC it would be fixed. I've gone through about 20 shells now and haven't had a problem. My Ruger 10/22 on the other hand has a failure to eject atleast once per clip.

Sent from my SM-N960W using Tapatalk

[DataPak420]

lol no kidding eh. what happens if you put a couple rounds through it that it doesn't like for whatever reason and decides not to eat or poop? (shoot or function)

https://remingtoncanada.com/en/support/warranty

Sent from my SM-N960W using Tapatalk

[Snowwalker]

Well I'd imagine the first thing they would say is to try different ammo. But if something doesn't work or malfunctions because the bolt or someother part is not made properly or up to QC it would be fixed. I've gone through about 20 shells now and haven't had a problem. My Ruger 10/22 on the other hand has a failure to eject atleast once per clip.

Sent from my SM-N960W using Tapatalk

The Ruger will have a pretty strong recoil spring since it's brand new. Wife has one and even after hundreds of rounds it will not eject if you feed it sub-standard Velocity ammo.

[Mauro]

https://remingtoncanada.com/en/support/warranty

Sent from my SM-N960W using Tapatalk

I bought a remington 870 a few years ago and while i was shooting trap my magazine cap came loose and the next few shots broke my ejector spring. Technically it was my fault for not tightening the magazine cap but Remington covered it under warranty anyway. I was a happy customer after that and my next purchase was a 597 instead of the Rugerr 10/22. The warranty process did take about 2 monthes to complete though.

[missy83]

Hey guys, I've been interested in starting hunting for a long time but work never co operated with the necessary courses to get my PAL and hunter safety, until now. I'm only interested in hunting small game, grouse and rabbits mostly and gradually work up to larger game. Now I have very little friends that hunt so I'm learning on my own which is fine by me, but when it comes to choosing the proper firearm I'm a little lost. I would like 1 gun that is able to hunt grouse and rabbit. I've been considering either a .410 or a 12 gauge. I've been leaning to the 12 being that the ammo is considerably cheaper, and I could eventually use it to hunt larger game as well. But would it be too much? I don't want to blow them to pieces I want to eat them . I'm okay with going into the stores and asking questions but I don't want the guy to think I'm completely lost and try to take advantage of that either. What do you use? Gauge/choke/shot?

Sent from my SM-N960W using Tapatalk

12 gauge is definitely more versatile. My first gun was a Remington 870 Express 12 gauge. When I first got into hunting, I was into rabbits & waterfowl. And it worked great. Later on I bought a rifled barrel for deer hunting. For rabbits & grouse I use #6 shot and I’ve never had a problem

[newbiehunter]

What ever he buys, getting the gun fitted to him will make a world of difference. It's hard enough trying to figure out what you did right and what you did wrong well learning to shoot. Having the center of your pattern three inches to the side and two inch below your point of aim will NOT make your day any better.

If your lucky a miracle will happen but don't count on it.

Do you know anyone in the GTA that might help with gun fitting?
I am kind of in the same shoes now. Complete beginner. When buying gun in cabelas only got attitude in response when asking about how to fit the gun to.myself.
Are there any professionals that.might help? What would such service cost in ballpark?

Thank you.

Sent from my Pixel 2 using Tapatalk

[jaycee]

You might try Precision Arms , on King Rd. east of # 400 Hwy.
You may have to be careful on how you approach them, sometimes they have an attitude problem also.
They are at 2974 King Rd.

[dean.f]

Do you know anyone in the GTA that might help with gun fitting?
I am kind of in the same shoes now. Complete beginner. When buying gun in cabelas only got attitude in response when asking about how to fit the gun to.myself.
Are there any professionals that.might help? What would such service cost in ballpark?

Thank you.

Sent from my Pixel 2 using Tapatalk

If you are the type for reading, look up "stock fitter's bible" by Rollin Oswald it will teach you a whole lot about gun fit. I read this book a few years ago and have adjusted my own shotguns ever since. I've had plenty of sour experiences with gun shop folks treating me like it's a burden to answer a couple questions.

[newbiehunter]

If you are the type for reading, look up "stock fitter's bible" by Rollin Oswald it will teach you a whole lot about gun fit. I read this book a few years ago and have adjusted my own shotguns ever since. I've had plenty of sour experiences with gun shop folks treating me like it's a burden to answer a couple questions.

Thank you for the tip. I have just ordered this book of Amazon [emoji2]

Sent from my Pixel 2 using Tapatalk