New build! Turning a 30-06 into a Whelen and ???

[Big Jack]

Sounds like a build for chasing game?..
Glades Armory has great options for bolt handles if considered for your build.

You are correct - moose!

I really have always wanted one though and this is my first step into CF barrel changes and customization.

I’ll check out those bolts.

[Big Jack]

It is rare, lots came up on CGN ..... when I did not have the budget for one, ha ha ha

Ya, lots of people bash the 760 rifles, claim they are bad but a 7/8in 5 shot group load with dads 3006, 180gr Hornady BTSP at 200fps over factory 180gr Remington Core Lok and their 3in group. That was done with the scope at the max 4x, not ideal for developing a load but very nice.

I have heard that some people like to move to the AI version of the Whelen due to headspace issues but read that this is mainly an issue with light pistol bullet loads.

The big problem with the whelen is it was wildcat at first, as many cartridges start, then became a saami chambering.

Lots of older rifles with wildcat chamberings of various dimensions.

If the smith uses a saami reamer it should be ok…..I hope!

[canadaman30]

You are correct - moose!

I really have always wanted one though and this is my first step into CF barrel changes and customization.

I’ll check out those bolts.

I also went American for a game chaser. Kept the original barrel though, earlier model with nicely blued steel, but did some work to get it to my liking in 7mmRM.

Attachment 41931

Best of luck Big Jack with your build

[Big Jack]

Thanks

Can’t see your pic for some reason?

[canadaman30]

Thanks

Can’t see your pic for some reason?

Sorry will try an update later when I return home. Something up with posting pic?
rsz_20210623_082257.jpg

Please give us updates when it's sending led down range.
Sounds like a great rifle to have in the woods

[Fox]

The big problem with the whelen is it was wildcat at first, as many cartridges start, then became a saami chambering.

Lots of older rifles with wildcat chamberings of various dimensions.

If the smith uses a saami reamer it should be ok…..I hope!

Ya, I don't see you having a problem.

There was also a 40 Whelen, I would imagine that thing would have had to be headspaced on the case mouth.

https://en.wikipedia.org/wiki/.400_Whelen

[Big Jack]

Interesting, a 40 would be an odd one!

Canadaman30, I’ll order one of those handles! Good looking rig.

[Fox]

Interesting, a 40 would be an odd one!

Canadaman30, I’ll order one of those handles! Good looking rig.

The 3006 has been necked up and down but for maximum energy the 338-06 and 35 whelen seem to be the best for reasonable range.

[Big Jack]

Update

To date I now have the following;

Donor 30-06
Clymer Go, No Go gauges
35 Whelen Dies
35 Whelen Case Length Gauge
35 cal 200 grain FTX
35 cal 225 Accubond
85 pcs 1X fired 35 Whelen brass
6.5- 20 Vortex Viper Scope
Barrel wrenches
Appropriate reloading powders

I have yet to receive;

Glades armoury bolt
JC custom prefit barrel
Boyd’s Laminate Thumbhole stock

ED671E01-F159-4D81-BD48-EB9E7C51F0BC.jpg

[canadaman30]

Nicely done Big Jack
Looks like good scope on gun now?