Impact Wrench question?

[terrym]

There is a great deal at Canadian Tire right now. Mastercraft impact wrench: 7.5 Amp, 240ft lbs max torque, 2200/2700 BPM. Reg $179.99 sale $59.99
I wonder if this tool is strong enough to handle the lug nuts on a car for wheel changes? I do own a compressor and was going to buy an air one but wonder if this enough? I torque my lugs to 110 lbs and this is rated to 240 so should be more than enough I would think?

[gooseman]

I have not used this exact wrench but used another brand similar specs and it worked good. I am not a fan of using a impact to install lug nuts unless your just spinning them tight then use a torque wrench to set them.
At that price I would say it's a deal hard to pass up if you can use it

[sawbill]

Yep! Nothing worse than some kid at CT torqueing your nuts so tight that you can't get them off when back in the boonies.
Some CTC tools scare me but I did recently buy a reciprocating saw that I'm more than happy with--quality ways that is!
I'd say that if you intend to use the wrench every blue moon or so, then it should be a safe deal.

[rf2]

I have a 3 amp CT impact and it was not quite strong enough under all conditions. I suspect that the 7.5 amp version would do the trick. If you are patient though, you can buy the 100 piece air tool kit for $100, which includes a decent air impact gun, plus three other air tools. You would have to make sure your compressor has enough output though.

[Bushmoose]

As has been said, do not torque the lug nuts with an impact wrench. You'll be sorry.

[impact]

I use an electric impact for seasonal tire changes, brake jobs, etc to remove the lugs and suspension components. More than enough power and works great.
I cannot dial in a torque setting on my older model so I use a manual torque wrench for re-installation of the lugs which is typically at 110 ft/lbs and also prevents warping the rotors.
Don't forget to torque the lugs in a star pattern and check them again after 100 kms or so.

[Hardman]

There is a great deal at Canadian Tire right now. Mastercraft impact wrench: 7.5 Amp, 240ft lbs max torque, 2200/2700 BPM. Reg $179.99 sale $59.99
I wonder if this tool is strong enough to handle the lug nuts on a car for wheel changes? I do own a compressor and was going to buy an air one but wonder if this enough? I torque my lugs to 110 lbs and this is rated to 240 so should be more than enough I would think?

I'm on my second electric impact gun. I would not be without one, I carry one on moose hunts with a small genny. The first one was wore out after 20 years of use. Even with air in your shop I would purchase this impact at that price

[JMatthews]

I have a Makita battery operated impact gun and I have used it many times for just about anything. Lots of power for almost anything you need, without having to plug it in. IMO a more versatile option.

[terrym]

I will grab it today. I also have a proper torque wrench and check my torque periodically.

[trimmer21]

I have one. I use it regularly and it does an excellent job. It sure saves on the wrist. Be sure to check your lugs with a proper torque wrench,though. Sometimes,the gun can run a bit over. It's a good unit.